Skip Navigation

POE and Cable

Sort By: Name Price

Conventional network cameras require a power cable for power supply and an Ethernet cable for data
transmission. PoE (Power-over-Ethernet), developed by the IEEE802.3af task force, enables power to be supplied
over the same Ethernet cable, and thus eliminates the use of power cables. By connecting a PoE-supported
camera to a PoE switch, you need not deploy additional power cables (Figure 4.11).
A PoE switch can provide 48 volts of direct current over two out of four pairs on an Ethernet cable, with maximum
current of 400mA and maximum output power of 15.4W. IEEE has developed a new IEEE 802.3at standard, known
as PoE+ to provide maximum output power of 30W.

Bulk buy *Discounted Multibuy price

  • Cable CAT5E GREY PATCH LEAD 20M

    £11.00

    IN STOCK

    • CAT5E UTP PATCH LEAD - GREY. Enhanced 350Mhz CAT5 UTP patch lead. 2 x RJ45 (8P/8C) connectors with strain relief boots and Cat5e 4 twisted pair networking cable. Wired pin to pin. Length: 20m
  • Vivotek POE Injector

    £39.50

    WAS £44.00

    IN STOCK

    • PoE Injector
    • 802.3af Compliant; Vivotek [5v/12V]
  • Vivotek POE Splitter 12V

    £19.50

    IN STOCK

    • PoE Splitter
    • 12W
    • 12V
    • 802.3af Compliant
  • Vivotek POE Splitter 5V

    £19.50

    IN STOCK

    • Vivotek 5V splitter; PoE Splitter
    • 12W
    • 5V
    • 802.3af Compliant
  • Vivotek PoE-Kit, 12V, (Injector+Splitter)

    £49.50

    WAS £60.00

    IN STOCK

    • 12V Power over Ethernet Kit
  • Vivotek PoE-Kit, 5V, (Injector+Splitter)

    £42.00

    WAS £60.00

    IN STOCK

    • 5V Power over Ethernet Kit

Bulk buy *Discounted Multibuy price