Dual Stream of H.264 and M-JPEG, 2 Way Audio, PoE, PTZ Control, Digital PTZ, Analog Video Loop-out, NTSC/PAL
Our online store has moved. To purchase this product, please link to our new online store at RF Concepts.co.uk.
The NVS102 Network Video Server digitizes analog video and then transmits the signal across an IP network - such as a LAN, Intranet or Internet. This allows you to take your first step in implementing an IP-based system without having to install new network cameras. Besides, the loop-out analog video also enables connection to existing CCTV equipment such as DVR, etc.
Dual Streaming of H.264 and M-JPEG
Up to 30 frames per second in all image resolutions
Supports image resolutions up to D1
Integrated motion detection with pre- and post-alarm image/video buffering
Event-triggered FTP and email upload of still images and videos
Full Duplex Two-Way Audio Support
Support PTZ control (with Pelco-D/P protocol)
Digital PTZ
SD/SDHC Local storage, Event triggered, scheduled and continuous recording supported
1 Port analog video loop-out port (Concurrent use of IP video & CCTV)
External microphone input & speaker output connector
Terminal block for external sensors or external alarm devices
Supports CBR (constant bit rate) and VBR (variable bit rate) modes
Controllable frame rate
Video access through any standard Web browser
Supports IEEE 802.3af Power over Ethernet injectors, mid- and end-spans
Integrated HTTP Web server supporting 50 simultaneous user connections
HTTPS supported (Hyper Text Transfer Protocol Secured)
Integrated E-Mail, FTP, DDNS and DHCP client
Extensive CGI API for software integration and remote programming operations
Including Windows based IP Installer and NVR(Network Video Recorder)
software for up to 16 channels
Classification | Specification | |
---|---|---|
General | CPU | 32-bit ARM9 RISC CPU up to 533MHz, 32KB I/D-Cache, MMU |
Video Buffer | 16Mbyte Video Frame Buffer | |
Flash | 16 Mbyte Flash Memory | |
SDRAM | 256Mbyte | |
Video | Analog Video Input | 1 channel input through BNC |
Video compression | H.264 baseline profile, Motion JPEG | |
Resolutions | Up to D1 (NTSC 720x480, PAL 720x576) | |
Frame rate | H.264 Up to 30fps with D1 | |
MJPEG Up to 30fps with VGA resolution | ||
Video streaming | Support multi stream with H.264, MJPEG | |
Adjustable frame rate | ||
VBR/CBR in H.264 | ||
Pan/Tilt/Zoom | PTZ camera control via Pelco-D/P protocol | |
Digital PTZ, Preset, tour | ||
Image setting | Brightness, Contrast, Sharpness control | |
Output | 1 x Composite(Loop-out) (1 Vpp 75 Ohm) | |
Audio | Audio streaming | Two-way, full duplex |
Audio compression | G.711 | |
Sample Rate | 8KHz | |
Data Rate | 64Kbps | |
Audio input | Microphone input /1 x Line-In (Single Mono) | |
Audio output | Line output/ 1 x Line-Out (Single Mono) | |
Serial | Port | RS-485, RS-232 (Internal Port for Console) |
Data Rate | 600bps~115200bps | |
Network | Security | Password protection |
User access log | ||
HTTPS encryption | ||
Supported protocol | HTTP, HTTPS, FTP, SMTP, UPnP, DNS, DynDNS, NTP | |
RTSP, RTP, TCP, UDP, ICMP, DHCP | ||
System integration | Intelligent video | Motion detection up to D1 with 32x24 blocks |
Alarm trigger | Intelligent video | |
External input/Normal Open/Close Type | ||
Alarm events | File upload via ftp, e-mail | |
Notification via email, FTP and TCP | ||
External ouput activation/Normal Open/Close Type | ||
Video buffer | 16MB pre-alarm and post-alarm | |
Recording | Save to SD/SDHC card with event mode and continuous mode | |
Firmware upgrade | Remote upgrade via network | |
API | CGI Interface document | |
ActiveX Interface(ocx(dll) + document) | ||
etc | RESET Button | 1 x Factory Reset Button |
Physical | Power Source | DC 12V/1.5A, PoE(Power over Ethernet): 802.3af |
Power Consumption | Max. 4.8W | |
Net Weight | 1.2Kg Appr. (Encoder Only) | |
LED`s | Power, Network Connection | |
Dimension | 140mm(W) X34mm(H) X 124mm(D) | |
Environment | Operating Temperature | -25 degree~50 degree Celsius (-13F~122F) |
Storage Temperature | -25 degree~60 degree Celsius (-13F~140F) | |
Software | Included Software | NVR Lite (16 Channel), IP Installer (Windows Only) |
Package | Package Contents | Network Camera, Use Manual, External Power Adaptor, Software CD |
Contact us by phone 9-5pm Monday to Friday
Please have correct product code(s) and all customer details available.
020 3051 5202 (UK)
0845 5275074 Local call rate- For UK
+44 20 3051 5202 (International call)
UK VAT registration 723 1684 45,
Company registration NI 47717
SECURE SHOPPING Order online safely and quickly